I love food with healthy and simple ingredients. I am a recipe developer and food blogger who is inspired by many cultures around the world. Today, I could be in Thailand having a Tom Yum Soup, and tomorrow I will be in France eating bouillabaisse!
Rogue Foodies is for everyone who loves to travel through the food they eat without borders, labels, or travel restrictions!
Become a member to get new recipes in your email every week
If missing then download and install the Mac driver for the H680 from the ATTO website. Then reboot the Mac. Note that Thunderbolt drives have a SAS adaptor inside, so they also need a driver from ATTO or Areca.
The first time after you install ATTO drivers on a new system, you will need to approve the new System Software. Also new installs of system software from YoYotta, ATTO, OSXFUSE (developer is Benjamin Fleischer) and other drivers may need approval. You will see a message like this saying System Extension Blocked Open the Security & Privacy page in Apple System Preferences, unlock the padlock and click Allow to enable the System software to load. You must click the Allow button locally on the Mac, clicking using remote screen sharing will not work. If the Allow button is not shown then reboot your Mac, try again to use an LTFS tape (which will fail) and then check the Security & Privacy page again. Also ensure that you have the latest macOS 10.13.6, 10.14.6, 10.15.7, 11.6.5 or latest Monterey
We were unable to find drivers for your product. Try manually selecting your operating system. If your operating system is not listed then HP may not provide driver support for your product with that operating system.
QuantaStor is Linux based and has kernel driver updates released multiple times per year to ensure broad support for the latest hardware from the major vendors including HPE, Dell/EMC, Cisco, Intel, Western Digital, Supermicro and Lenovo. The hardware listed below has been tested for specific compatibility with QuantaStor to ensure system stability, performance and compatibility. If you have questions about specific hardware compatibility for components not listed below please contact email@example.com for assistance.
2 [This is a limitation with Lenovo Customized VMWare image having a downlevel LSI/Avago Provider that doesn't work properly with LSI/Avago native driver This issue should be routed to the Lenovo VMware team that owns the Customized image Target Fixed Date: 2016/2/1]
I have a dell perc h310 and an old ga ep45 ud2h motherboard. The board would not boot gave this error message: No physical memory available at the location required for the windows boot manager. The system can not continue.Tried flashing board while in the EP45 mb. Kept hanging after megarec.exe -writesbr 0 sbrempty.bin command.Moved the board to an HP g1 800 sff and successfully flash the board. Reinstalled into the ep45 ud2h and now it boots and recognizes sas drives attached.Thanks:)
guided me to do the re-flash with the megarec command instead and flash the older Dell firmware (the 6gbpsas.FW) . That's what I have done to be able to recover the card in state where it could be flashed to the newest IR firmware. (not IT firmware)
The IBM Guardium solution works only on x86 Intel-based or AMD-based platforms (for example, x86_64). Only platforms and hardware that are officially supported by RedHat Linux 6.5 (64-bit) are expected to work properly (See links to RedHat Support documentation, listed at end of this document). However, not all officially supported platforms are guaranteed. Platforms that require additional drivers or specialized post-install configuration are not supported at this time (see note below).
Note: Intel recommends that end users utilize driver updates provided by their system manufacturer/provider or via Windows Update to eliminate the potential impact caused by loading non-customized drivers. System manufacturers regularly customize Intel generic drivers to meet the needs of their specific system design. In such cases, use of the Intel generic driver update is not recommended.
lspci show the following:01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller (prog-if 01 [AHCI 1.0])Subsystem: JMicron Technology Corp. JMB58x AHCI SATA controllerFlags: bus master, fast devsel, latency 0, IRQ 92I/O ports at e200 [size=128]I/O ports at e180 [size=128]I/O ports at e100 [size=128]I/O ports at e080 [size=128]I/O ports at e000 [size=128]Memory at d0810000 (32-bit, non-prefetchable) [size=8K]Expansion ROM at d0800000 [disabled] [size=64K]Capabilities:Kernel driver in use: ahciKernel modules: ahci
01:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) Subsystem: Broadcom / LSI 9200-8e [LSI SAS 6Gb/s SAS/SATA PCIe x8 External HBA] Flags: bus master, fast devsel, latency 0, IRQ 16 I/O ports at e000 [size=256] Memory at d08c0000 (64-bit, non-prefetchable) [size=16K] Memory at d0880000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at d0800000 [disabled] [size=512K] Capabilities: Kernel driver in use: mpt3sas Kernel modules: mpt3sas 2b1af7f3a8